BT-901 Magnetic core glue

Characteristics

1. Fast drying speed, low curing stress, high bonding strength;

2. One-component epoxy glue, high viscosity, easy operation, high heat resistance level;

3. It is suitable for bonding coils, metals, ceramics, plastics and other materials.

Technical parameters

Operation process

1. Before using the product, please let the product return to room temperature, if the product is not used up, it cannot be restored to freeze, if the freezing temperature is lower than 5°C, it is recommended to keep warm at 40°C for 2 hours before use.

2. Apply glue directly and bond.

3. Curing conditions: 100°C×60 minutes, or 120°C×30 minutes, or 150°C×5 minutes

Due to the different sizes of the bonded objects or whether the oven has ventilation conditions will cause different curing degrees, it is necessary to confirm whether the curing conditions used can meet the design requirements before batch use.

Packaging, shipping and storage

1. Packed in 1KG/drum or according to customer requirements.

2. When frozen and stored at 4°C~10°C, the quality assurance period: 5 months;

3. The product is a non-hazardous chemical and is transported as a general chemical;

Notes:

1. The workplace should be kept clean and airy, and exhaust equipment must be installed when necessary;

2. Avoid direct contact with the human body as much as possible;

3. If accidentally touched, it is best to wipe with acetone or alcohol, and then clean with soap and tap water;

4. If it accidentally splashes into the eyes, rinse with plenty of water for more than 15 minutes and ask a doctor for examination and treatment.

Regardless of transportation, storage, and use, you need to take the initiative to request MSDS from our company to clarify the physical and chemical safety performance.