BT-960 Surface Adhesive

The product has excellent heat resistance function after curing (short-term heat resistance can be up to 400 °C coating film does not foam, does not crack), adhesion strength, cold and thermal shock resistance and excellent heat resistance, strong water resistance, good insulation, low stress and other characteristics. This product is environmentally friendly.

2. Material pre-curing properties

3. How to use

1) Brush or drop glue.

2) Curing conditions:

After brushing the workpiece, pre-bake at 160°C for 10~30 minutes

× another 200°C for 60 minutes

Due to the different sizes of encapsulated or bonded objects or whether the oven has ventilation conditions will cause different degrees of curing, it is necessary to confirm whether the curing conditions used can meet the design requirements before batch use.

4. Post-curing properties of the material (24 hours)

Shear strength at different temperatures (aluminum/aluminum)

5. Storage

A. Store at room temperature, pay attention to ventilation, quality assurance period: 6 months, seal and store in a dark place.

B. From the date of manufacture, the product will be re-tested for more than 6 months before deciding on the trade-off.

Disclaimer:

This technical data is typical data tested under specific conditions, not a specification acknowledgment, and is for reference only. Please refer to the measured data when using it.