BT-505 Silver Stripper

Characteristics

1. BT-505 Silver Stripper is a special product to strip the silver plating layer by anodic electrolysis.

2. Without Cyanide and acid，the desilvering water configured can use repeatedly，the silver can precipitate directly

and become silver bar after burning.

3. No hurt to substrate and other coatings.

4. The silver stripper can use a long time, solution is easy to control and the. operating range is widely.

5. the detecting of RoHs is qualified.

Technical parameters

BT-505 Silver Stripper is white crystalline powder.

Packaging, transport and Storage

1. BT-505 uses 1kg / bag of strong acid plastic bag,20 bags/case.

2. Stored at 25℃ below, airtight container, the shelf life is 6 months.

3. Product should be stored to ensure ventilation, drying, to prevent direct sunlight, and isolate the source of fire, away from heat.

4. Avoid exposure, rain, high temperature at transit. 

Attention

1. You should pay more attention for safety, you should wear protective gloves, protective clothing, masks, glasses, avoid to contact with skin, eyes, if you are injured, flush with water immediately (severe required medical diagnosis);

2. When the heating is beginning, you should cover the container with metal to avoid heating up the melt which due to the uneven heating of the stripping pink splash. Do not use it until the stripping powder is fully melted and open the ild.

3. When using the rest for some time, it should also cover cap or seal, as the silver stripper are strong hygroscopic powder paint stripping chemicals, easy to absorb water vapor in the air, thus avoiding the use of temperature rise during the next water from boiling splash.

Whether transport, storage, consumer initiative required the company to obtain msds, clear physical and chemical safety, if not obtain as a known performance, the company responsible for any accident compensation.