24 Hour Service Hotline:0769-22710188 / 13713357162

TB Environmental Cleaning Agent

The enameled wire stripper produced by our company is a new generation of series resonant circuit, through the inverter principle to generate an alternating magnetic field, the environmental protection cleaning agent molecules ionize, and promote the polymer chain of the organic paint film of the enameled wire to break and dissolve.

TB-environmental protection cleaning agent is a new type of paint solvent developed by our company, which is a cleaning agent that dissolves patent skin, which can not only quickly dissolve patent skin at high temperature, but also it complies with RoSH2.0, which is a truly non-dangerous environmental protection agent.

  • Details
  • Application

Characteristics

1. Fast speed, suitable for various temperature resistance grades (130, 155, 180, 200, 220) of aluminum and copper enameled wire, the wire diameter of aluminum and copper enameled wire is 0.1mm-5.0mm.

2. Environmentally friendly, with little smell and no irritation. If the skin touches, rinse directly with clean water, which will not harm the skin and will not be absorbed by the skin.

3. Operating at high temperature will not harm the substrate.


Operating parameters

TB-Eco-friendly cleaning agent is a light yellow to brown liquid with low odor, non-irritating and non-flammable.

The specific gravity of this product is about 1.0, and the PH value is about 8.


Operation process

Pour the cleaning agent into the heating equipment and set the temperature to 120-160 degrees to quickly remove the paint. After the paint is removed, it is necessary to clean to remove the residual liquid.

The higher the paint stripping temperature, the faster the paint removal speed, but the higher the volatilization rate.


Packaging, shipping and storage

1. Store in a closed container at room temperature, with a shelf life of 6 months;

2. When the product is stored, it should be ventilated and dry, prevent direct sunlight from it, and isolate the fire source.

3. During transportation, it should be protected from sun exposure, rain, high temperature, leakage, and extrusion.


Notes:

Pay attention to safety when using it, and rinse with water if it comes into contact with the skin. If you accidentally touch your eyes, rinse immediately with plenty of water, and if it is serious, seek medical attention immediately.

When working, you need to wear protective equipment such as goggles and masks.